NOTE, 11/21/2023: Please see the information below about the RD_NO column.

Crash data shows information about each traffic crash on city streets within the City of Chicago limits and under the jurisdiction of Chicago Police Department (CPD). Data are shown as is from the electronic crash reporting system (E-Crash) at CPD, excluding any personally identifiable information. Records are added to the data portal when a crash report is finalized or when amendments are made to an existing report in E-Crash. Data from E-Crash are available for some police districts in 2015, but citywide data are not available until September 2017. About half of all crash reports, mostly minor crashes, are self-reported at the police district by the driver(s) involved and the other half are recorded at the scene by the police officer responding to the crash. Many of the crash parameters, including street condition data, weather condition, and posted speed limits, are recorded by the reporting officer based on best available information at the time, but many of these may disagree with posted information or other assessments on road conditions. If any new or updated information on a crash is received, the reporting officer may amend the crash report at a later time. A traffic crash within the city limits for which CPD is not the responding police agency, typically crashes on interstate highways, freeway ramps, and on local roads along the City boundary, are excluded from this dataset.

All crashes are recorded as per the format specified in the Traffic Crash Report, SR1050, of the Illinois Department of Transportation. The crash data published on the Chicago data portal mostly follows the data elements in SR1050 form. The current version of the SR1050 instructions manual with detailed information on each data elements is available here.

As per Illinois statute, only crashes with a property damage value of $1,500 or more or involving bodily injury to any person(s) and that happen on a public roadway and that involve at least one moving vehicle, except bike dooring, are considered reportable crashes. However, CPD records every reported traffic crash event, regardless of the statute of limitations, and hence any formal Chicago crash dataset released by Illinois Department of Transportation may not include all the crashes listed here.

Change 11/21/2023: We have removed the RD_NO (Chicago Police Department report number) for privacy reasons.

List of all Chicago streets with suffixes and minimum and maximum address numbers.

Map shows physical locations where CTA fare media, such as Transit Cards, CTA Passes and Chicago Cards were sold through approximately July 2014, prior to the implementation of Ventra cards. The locations for Ventra card sales/reloading are more extensive and not yet available in this format. Please see http://www.transitchicago.com/ventra for information on the Ventra program and https://www.ventrachicago.com/retailers/locations to find Ventra retail locations.

Taxi trips reported to the City of Chicago in its role as a regulatory agency. To protect privacy but allow for aggregate analyses, the Taxi ID is consistent for any given taxi medallion number but does not show the number, Census Tracts are suppressed in some cases, and times are rounded to the nearest 15 minutes.

Due to the data reporting process, not all trips are reported but the City believes that most are.

See http://digital.cityofchicago.org/index.php/chicago-taxi-data-released for more information about this dataset and how it was created.

See http://dev.cityofchicago.org/open%20data/data%20portal/2019/04/12/tnp-taxi-privacy.html for further discussion of the approach to privacy in this dataset.

See http://dev.cityofchicago.org/open%20data/data%20portal/2019/07/01/taxi-dataset-relaunch.html for discussion of significant changes in July 2019.

This dataset displays location for vehicles that have been towed and impounded by the City of Chicago within the last 90 days. Illegally parked vehicles, abandoned vehicles and vehicles used for illegal activities may be towed by the Chicago Police Department, the Department of Streets and Sanitation, the Department of Revenue, Aviation and the office of the City Clerk. After a tow request is issued, an inventory number is assigned by the Department of Streets and Sanitation and a truck is dispatched to tow the requested vehicle to a City auto pound. Disclaimer: This dataset includes vehicles towed or relocated by the City of Chicago; it does not include vehicles towed by a private towing company.

Background Information:
Auto Pound Locations (http://j.mp/kG5sgF).
Tow Process Overview (http://j.mp/lfBOEP).
Common Towing Questions (http://j.mp/imFYlp).
Parking and Standing Violations (http://j.mp/ifW8Uj).
Related Applications: Find Your Vehicle (http://j.mp/lWn0S7).

This dataset shows the location, first operational date, and approaches of the speed cameras in the City of Chicago. The approach describes the originating direction of travel which is monitored by a speed camera.

All trips, from November 2018 to December 2022, reported by Transportation Network Providers (sometimes called rideshare companies) to the City of Chicago as part of routine reporting required by ordinance.

Census Tracts are suppressed in some cases, and times are rounded to the nearest 15 minutes. Fares are rounded to the nearest $2.50 and tips are rounded to the nearest $1.00.

For a discussion of the approach to privacy in this dataset, please see http://dev.cityofchicago.org/open%20data/data%20portal/2019/04/12/tnp-taxi-privacy.html.

This lists datasets published by CTA in the City of Chicago Data Portal.

This dataset reflects the daily volume of violations created by the City of Chicago Red Light Program for each camera. The data reflects violations that occurred from July 1, 2014 until present, minus the most recent 14 days. This data may change due to occasional time lags between the capturing of a potential violation and the processing and determination of a violation. The most recent 14 days are not shown due to revised data being submitted to the City of Chicago during this period. The reported violations are those that have been collected by the camera system and reviewed by two separate City contractors. In some instances, due to the inability the registered owner of the offending vehicle, the violation may not be issued as a citation. However, this dataset contains all violations regardless of whether a citation was actually issued, which provides an accurate view into the Red Light Program. Because of occasional time lags between the capturing of a potential violation and the processing and determination of a violation, as well as the occasional revision of the determination of a violation, this data may change. More information on the Red Light Program can be found here: http://www.cityofchicago.org/city/en/depts/cdot/supp_info/red-light_cameraenforcement.html. The corresponding dataset for speed camera violations is https://data.cityofchicago.org/id/hhkd-xvj4.

This dataset contains the current estimated speed for about 1250 segments covering 300 miles of arterial roads. For a more detailed description, go to: http://bit.ly/Q9AZAD.

The Chicago Traffic Tracker estimates traffic congestion on Chicago’s arterial streets (nonfreeway
streets) in real-time by continuously monitoring and analyzing GPS traces received from Chicago Transit Authority (CTA) buses. Two types of congestion estimates are produced every ten minutes: 1) by Traffic Segments and 2) by Traffic Regions or Zones. Congestion estimate by traffic segments gives the observed speed typically for one-half mile of a street in one direction of traffic.

Traffic Segment level congestion is available for about 300 miles of principal arterials. Congestion by Traffic Region gives the average traffic condition for all arterial street segments within a region. A traffic region is comprised of two or three community areas with comparable traffic patterns. 29 regions are created to cover the entire city (except O’Hare airport area).
This dataset contains the current estimated speed for about 1250 segments covering 300 miles of arterial roads.
There is much volatility in traffic segment speed. However, the congestion estimates for the traffic regions remain consistent for relatively longer period. Most volatility in arterial speed comes from the very nature of the arterials themselves. Due to a myriad of factors, including but not limited to frequent
intersections, traffic signals, transit movements, availability of alternative routes, crashes, short length of the segments, etc. speed on individual arterial segments can fluctuate from heavily congested to no congestion and back in a few minutes. The segment speed and traffic region congestion estimates
together may give a better understanding of the actual traffic conditions.

This dataset shows the location, first operational date, and approaches of the speed cameras in the City of Chicago. The approach describes the originating direction of travel which is monitored by a speed camera.

To attempt to make historical versions of this dataset more available, "Dataset Changelog" is enabled at the bottom of the main page. We cannot guarantee that the archival records will remain permanently so advise downloading any you think you may want. Some intermediate versions, especially minor changes, may not be visible. The map based on this dataset will not have past versions.

As described in http://bit.ly/cdotpermitspost, the function of this dataset was replaced by https://data.cityofchicago.org/d/pubx-yq2d on 12/7/2015. This dataset is historical-only.

The Chicago Department of Transportation (CDOT) reviews applications for permits for the temporary use of the public way for construction projects, parades, festivals, block parties, athletic events, etc.This dataset includes permits applied for, issued, amended and expired with permit start dates beginning January 1, 2011. Note a permit may be amended if any details are changed after the initial issuance. For more information about Public Right-of-Way Use Permits, go to http://bit.ly/15ypkkL.

NOTE, 11/21/2023: Please see the information below about the RD_NO column.

This dataset contains information about vehicles (or units as they are identified in crash reports) involved in a traffic crash. This dataset should be used in conjunction with the traffic Crash and People dataset available in the portal. “Vehicle” information includes motor vehicle and non-motor vehicle modes of transportation, such as bicycles and pedestrians. Each mode of transportation involved in a crash is a “unit” and get one entry here. Each vehicle, each pedestrian, each motorcyclist, and each bicyclist is considered an independent unit that can have a trajectory separate from the other units. However, people inside a vehicle including the driver do not have a trajectory separate from the vehicle in which they are travelling and hence only the vehicle they are travelling in get any entry here. This type of identification of “units” is needed to determine how each movement affected the crash. Data for occupants who do not make up an independent unit, typically drivers and passengers, are available in the People table. Many of the fields are coded to denote the type and location of damage on the vehicle. Vehicle information can be linked back to Crash data using the “CRASH_RECORD_ID” field. Since this dataset is a combination of vehicles, pedestrians, and pedal cyclists not all columns are applicable to each record. Look at the Unit Type field to determine what additional data may be available for that record.

The Chicago Police Department reports crashes on IL Traffic Crash Reporting form SR1050. The crash data published on the Chicago data portal mostly follows the data elements in SR1050 form. The current version of the SR1050 instructions manual with detailed information on each data elements is available here.

Change 11/21/2023: We have removed the RD_NO (Chicago Police Department report number) for privacy reasons.

This dataset shows systemwide boardings for both bus and rail services provided by CTA, dating back to 2001. Daytypes are as follows: W = Weekday, A = Saturday, U = Sunday/Holiday. See attached readme file for information on how these numbers are calculated.

Average Daily Traffic (ADT) counts are analogous to a census count of vehicles on city streets. These counts provide a close approximation to the actual number of vehicles passing through a given location on an average weekday. Since it is not possible to count every vehicle on every city street, sample counts are taken along larger streets to get an estimate of traffic on half-mile or one-mile street segments. ADT counts are used by city planners, transportation engineers, real-estate developers, marketers and many others for myriad planning and operational purposes.
Data Owner: Transportation.
Time Period: 2006.
Frequency: A citywide count is taken approximately every 10 years. A limited number of traffic counts will be taken and added to the list periodically.
Related Applications: Traffic Information Interactive Map (http://webapps.cityofchicago.org/traffic/).

This dataset contains the historical estimated congestion for over 1,000 traffic segments, starting in approximately March 2018. Older records are in https://data.cityofchicago.org/d/77hq-huss. The most recent estimates for each segment are in https://data.cityofchicago.org/d/n4j6-wkkf.

The Chicago Traffic Tracker estimates traffic congestion on Chicago’s arterial streets (non-freeway streets) in real-time by continuously monitoring and analyzing GPS traces received from Chicago Transit Authority (CTA) buses. Two types of congestion estimates are produced every 10 minutes: 1) by Traffic Segments and 2) by Traffic Regions or Zones. Congestion estimates by traffic segments gives observed speed typically for one-half mile of a street in one direction of traffic. Traffic Segment level congestion is available for about 300 miles of principal arterials.

Congestion by Traffic Region gives the average traffic condition for all arterial street segments within a region. A traffic region is comprised of two or three community areas with comparable traffic patterns. 29 regions are created to cover the entire city (except O’Hare airport area). There is much volatility in traffic segment speed. However, the congestion estimates for the traffic regions remain consistent for a relatively longer period. Most volatility in arterial speed comes from the very nature of the arterials themselves. Due to a myriad of factors, including but not limited to frequent intersections, traffic signals, transit movements, availability of alternative routes, crashes, short length of the segments, etc. Speed on individual arterial segments can fluctuate from heavily congested to no congestion and back in a few minutes.

The segment speed and traffic region congestion estimates together may give a better understanding of the actual traffic conditions.

This dataset contains the current estimated congestion for the 29 traffic regions. For a detailed description, go to: http://bitly.com/TeqrNv.

The Chicago Traffic Tracker estimates traffic congestion on Chicago’s arterial streets (non-freeway streets) in real-time by continuously monitoring and analyzing GPS traces received from Chicago Transit Authority (CTA) buses. Two types of congestion estimates are produced every 10 minutes: 1) by Traffic Segments and 2) by Traffic Regions or Zones. Congestion estimates by traffic segments gives observed speed typically for one-half mile of a street in one direction of traffic. Traffic Segment level congestion is available for about 300 miles of principal arterials. Congestion by Traffic Region gives the average traffic condition for all arterial street segments within a region. A traffic region is comprised of two or three community areas with comparable traffic patterns. 29 regions are created to cover the entire city (except O’Hare airport area).

There is much volatility in traffic segment speed. However, the congestion estimates for the traffic regions remain consistent for a relatively longer period. Most volatility in arterial speed comes from the very nature of the arterials themselves. Due to a myriad of factors, including but not limited to frequent intersections, traffic signals, transit movements, availability of alternative routes, crashes, short length of the segments, etc. Speed on individual arterial segments can fluctuate from heavily congested to no congestion and back in a few minutes. The segment speed and traffic region congestion estimates together may give a better understanding of the actual traffic conditions.

This dataset contains the historical estimated congestion for the 29 traffic regions, starting in approximately March 2018. Older records are in https://data.cityofchicago.org/d/emtn-qqdi. The most recent estimates for each segment are in https://data.cityofchicago.org/d/t2qc-9pjd.

The Chicago Traffic Tracker estimates traffic congestion on Chicago’s arterial streets (non-freeway streets) in real-time by continuously monitoring and analyzing GPS traces received from Chicago Transit Authority (CTA) buses. Two types of congestion estimates are produced every 10 minutes: 1) by Traffic Segments and 2) by Traffic Regions or Zones. Congestion estimates by traffic segments gives observed speed typically for one-half mile of a street in one direction of traffic. Traffic Segment level congestion is available for about 300 miles of principal arterials. Congestion by Traffic Region gives the average traffic condition for all arterial street segments within a region. A traffic region is comprised of two or three community areas with comparable traffic patterns. 29 regions are created to cover the entire city (except O’Hare airport area). There is much volatility in traffic segment speed. However, the congestion estimates for the traffic regions remain consistent for a relatively longer period. Most volatility in arterial speed comes from the very nature of the arterials themselves. Due to a myriad of factors, including but not limited to frequent intersections, traffic signals, transit movements, availability of alternative routes, crashes, short length of the segments, etc. Speed on individual arterial segments can fluctuate from heavily congested to no congestion and back in a few minutes. The segment speed and traffic region congestion estimates together may give a better understanding of the actual traffic conditions. Current estimates of traffic congestion by region are available at http://bit.ly/103beCf.

This dataset shows the location, first operational date, and approaches of the red light cameras in the City of Chicago. The approach describes the originating direction of travel which is monitored by a red light camera.

This dataset shows CTA Bus Stop shelters which are slated to have digital signs added to them to show upcoming arrivals. The listing is subject to change.

Average Daily Traffic (ADT) counts are analogous to a census count of vehicles on city streets. These counts provide a close approximation to the actual number of vehicles passing through a given location on an average weekday. Since it is not possible to count every vehicle on every city street, sample counts are taken along larger streets to get an estimate of traffic on half-mile or one-mile street segments. ADT counts are used by city planners, transportation engineers, real-estate developers, marketers and many others for myriad planning and operational purposes.
Data Owner: Transportation.
Time Period: 2006.
Frequency: A citywide count is taken approximately every 10 years. A limited number of traffic counts will be taken and added to the list periodically.
Related Applications: Traffic Information Interactive Map (http://webapps.cityofchicago.org/traffic/).

This list shows daily totals of ridership, by station entry, for each 'L' station dating back to 2001. Dataset shows entries at all turnstiles, combined, for each station. Daytypes are as follows: W=Weekday, A=Saturday, U=Sunday/Holiday. See attached readme file for information on how these numbers are calculated.

NOTE, 11/21/2023: Please see the information below about the RD_NO column.

This data contains information about people involved in a crash and if any injuries were sustained. This dataset should be used in combination with the traffic Crash and Vehicle dataset. Each record corresponds to an occupant in a vehicle listed in the Crash dataset. Some people involved in a crash may not have been an occupant in a motor vehicle, but may have been a pedestrian, bicyclist, or using another non-motor vehicle mode of transportation. Injuries reported are reported by the responding police officer. Fatalities that occur after the initial reports are typically updated in these records up to 30 days after the date of the crash. Person data can be linked with the Crash and Vehicle dataset using the “CRASH_RECORD_ID” field. A vehicle can have multiple occupants and hence have a one to many relationship between Vehicle and Person dataset. However, a pedestrian is a “unit” by itself and have a one to one relationship between the Vehicle and Person table.

The Chicago Police Department reports crashes on IL Traffic Crash Reporting form SR1050. The crash data published on the Chicago data portal mostly follows the data elements in SR1050 form. The current version of the SR1050 instructions manual with detailed information on each data elements is available here.

Change 11/21/2023: We have removed the RD_NO (Chicago Police Department report number) for privacy reasons.

This dataset presents current and former locations of vehicles that have been relocated by the City of Chicago within the last 90 days. Vehicles may be relocated, but not impounded, due to inoperability, accident, severe weather, special events, construction or other work being performed in a thoroughfare where the vehicle was previously located.

This dataset contains all those street segments (individually uniquely identified by Record ID) that have been designated as belonging to a “Residential Parking Zone.” Residential Parking Zones are established by passage of legislation through the Chicago City Council; this data set is updated daily, but major update installments typically occur shortly after City Council Meetings (where/when legislation affecting zones – such as zone creation or zone modification – occurs). (See City Council Meeting schedule: https://chicago.legistar.com/Calendar.aspx.) The collection of street segments for a single zone (collectively identified by Zone number) are not required to constitute a seamless polygon; however, they must be contiguous; in this sense, “Zones” often closer resemble a collection of intersecting segments rather than an unbroken area. Segments are commonly categorized as being either “Standard” or “Buffer”: Standard means that signs exist on the street segment beginning at the low-point and ending at the high-point; Buffer means that physical signs do not exist for that zone on that physical street, but residents of addresses within that segment shall have the privilege to purchase zone products (daily permits and annual passes) for that zone, as if physical signs were installed. (In this way, segments designated as ‘Buffer’ can in fact overlap with either other buffers and/or standard segments.) Physical signs will display the zone number and the day/times when the zone restriction is in effect, e.g., “All Times” / “Anytime”; “Monday through Friday”; “6am – 6pm All Days.” During restricted days/times, any vehicle parked in the zone which does not display a valid unexpired zone product (either a daily permit or an annual pass printed on the City Vehicle Sticker) is subject to ticketing/enforcement. Read more about Residential Zone Parking and eligibility to purchase zoned products: https://www.chicityclerk.com/index.php/residential-zone-parking-faqs.