This dataset reflects reported incidents of crime that have occurred in the City of Chicago over the past year, minus the most recent seven days of data. Data is extracted from the Chicago Police Department's CLEAR (Citizen Law Enforcement Analysis and Reporting) system. In order to protect the privacy of crime victims, addresses are shown at the block level only and specific locations are not identified. Should you have questions about this dataset, you may contact the Research & Development Division of the Chicago Police Department at 312.745.6071 or RandD@chicagopolice.org.
Disclaimer: These crimes may be based upon preliminary information supplied to the Police Department by the reporting parties that have not been verified. The preliminary crime classifications may be changed at a later date based upon additional investigation and there is always the possibility of mechanical or human error. Therefore, the Chicago Police Department does not guarantee (either expressed or implied) the accuracy, completeness, timeliness, or correct sequencing of the information and the information should not be used for comparison purposes over time. The Chicago Police Department will not be responsible for any error or omission, or for the use of, or the results obtained from the use of this information. All data visualizations on maps should be considered approximate and attempts to derive specific addresses are strictly prohibited.

The Chicago Police Department is not responsible for the content of any off-site pages that are referenced by or that reference this web page other than an official City of Chicago or Chicago Police Department web page. The user specifically acknowledges that the Chicago Police Department is not responsible for any defamatory, offensive, misleading, or illegal conduct of other users, links, or third parties and that the risk of injury from the foregoing rests entirely with the user. Any use of the information for commercial purposes is strictly prohibited. The unauthorized use of the words "Chicago Police Department," "Chicago Police," or any colorable imitation of these words or the unauthorized use of the Chicago Police Department logo is unlawful. This web page does not, in any way, authorize such use.
Data is updated daily.

Current community area boundaries in Chicago. The data can be viewed on the Chicago Data Portal with a web browser. However, to view or use the files outside of a web browser, you will need to use compression software and special GIS software, such as ESRI ArcGIS (shapefile) or Google Earth (KML or KMZ), is required.

Pursuant to an ordinance adopted April 21, 2021, the Problem Landlord List has been replaced by the Building Code Scofflaw List, effective September 1, 2021. Please see the data set at https://data.cityofchicago.org/Buildings/Building-Code-Scofflaw-List/crg5-4zypfor current information.

This empty dataset will remain live until at least March 1, 2022 to allow former users to see the above note. After that date has passed, this dataset may be deleted entirely.

Map shows physical locations where CTA fare media, such as Transit Cards, CTA Passes and Chicago Cards were sold through approximately July 2014, prior to the implementation of Ventra cards. The locations for Ventra card sales/reloading are more extensive and not yet available in this format. Please see http://www.transitchicago.com/ventra for information on the Ventra program and https://www.ventrachicago.com/retailers/locations to find Ventra retail locations.

Note: This map and the underlying dataset are no longer updated but are being kept for historical reference. For the Department of Public Health’s current COVID-19 testing information at any time, please see the Testing section of https://www.chicago.gov/coronavirus.

Map of locations offering COVID-19 testing in Chicago.

For more information on COVID-19 testing, see https://www.chicago.gov/city/en/sites/covid-19/home/managing-your-health.html?#tab-shouldtest.

The Chicago Building Scofflaw Ordinance (Section 2-92-416 of the Municipal Code of Chicago) is designed to prevent landlords that refuse or refrain from correcting ongoing building code violations from receiving city contracts, including those that subsidize housing. Building owners must have a least three residential buildings with uncorrected violations and have had three or more properties referred to Circuit Court within the applicable 12 month period to be eligible for the list. The building code scofflaw list is updated once a year on the first business day of December, and building owners may appeal being named on the list. Building owners with controlling interest in at least three residential properties that have habitual, extensive or serioues building code violations are now ineligible for any new city contracts in 2015. The following individuals or entities have been placed on the Building Code Scofflaw list for the entire calendar year.

This map shows potholes patched in the last seven days, based on the corresponding 311 service requests at https://data.cityofchicago.org/id/7as2-ds3y.

A map of the EZ Pay kiosk facilities.

Fire stations located in Chicago

Police station locations in Chicago

Ward boundaries in Chicago from May 2015 to May 2023, corresponding to the dates when a new City Council is sworn in, based on the immediately preceding elections. Neither this description nor the dataset should be relied upon in situations where legal precision is required. The data can be viewed on the Chicago Data Portal with a web browser. However, to view or use the files outside of a web browser, you will need to use compression software and special GIS software, such as ESRI ArcGIS (shapefile) or Google Earth (KML or KMZ).

Census tract boundaries in Chicago. The data can be viewed on the Chicago Data Portal with a web browser. However, to view or use the files outside of a web browser, you will need to use compression software and special GIS software, such as ESRI ArcGIS (shapefile) or Google Earth (KML or KMZ), is required.

This dataset shows the location, first operational date, and approaches of the speed cameras in the City of Chicago. The approach describes the originating direction of travel which is monitored by a speed camera.

City boundary of Chicago. The data can be viewed on the Chicago Data Portal with a web browser. However, to view or use the files outside of a web browser, you will need to use compression software and special GIS software, such as ESRI ArcGIS (shapefile) or Google Earth (KML or KMZ).

Neighborhood boundaries in Chicago, as developed by the Office of Tourism. These boundaries are approximate and names are not official. The data can be viewed on the Chicago Data Portal with a web browser. However, to view or use the files outside of a web browser, you will need to use compression software and special GIS software, such as ESRI ArcGIS (shapefile) or Google Earth (KML or KMZ), is required.

ZIP Code boundaries in Chicago. The data can be viewed on the Chicago Data Portal with a web browser. However, to view or use the files outside of a web browser, you will need to use compression software and special GIS software, such as ESRI ArcGIS (shapefile) or Google Earth (KML or KMZ).

Ward precincts, which function as local election districts to determine the polling places for voters, based on their addresses. Precincts are based on U.S. Census Bureau blocks. These precincts were first used for the 2012 elections and first used for Chicago municipal elections in 2015.

This dataset shows CTA Bus Stop shelters which are slated to have digital signs added to them to show upcoming arrivals. The listing is subject to change.

Current police district boundaries in Chicago. The data can be viewed on the Chicago Data Portal with a web browser. However, to view or use the files outside of a web browser, you will need to use compression software and special GIS software, such as ESRI ArcGIS (shapefile) or Google Earth (KML or KMZ), is required.

Average Daily Traffic (ADT) counts are analogous to a census count of vehicles on city streets. These counts provide a close approximation to the actual number of vehicles passing through a given location on an average weekday. Since it is not possible to count every vehicle on every city street, sample counts are taken along larger streets to get an estimate of traffic on half-mile or one-mile street segments. ADT counts are used by city planners, transportation engineers, real-estate developers, marketers and many others for myriad planning and operational purposes.
Data Owner: Transportation.
Time Period: 2006.
Frequency: A citywide count is taken approximately every 10 years. A limited number of traffic counts will be taken and added to the list periodically.
Related Applications: Traffic Information Interactive Map (http://webapps.cityofchicago.org/traffic/).

Current police beat boundaries in Chicago. The data can be viewed on the Chicago Data Portal with a web browser. However, to view or use the files outside of a web browser, you will need to use compression software and special GIS software, such as ESRI ArcGIS (shapefile) or Google Earth (KML or KMZ), is required.

Building footprints in Chicago. Metadata may be viewed and downloaded at http://bit.ly/HZVDIY. The data can be viewed on the Chicago Data Portal with a web browser. However, to view or use the files outside of a web browser, you will need to use compression software and special GIS software, such as ESRI ArcGIS (shapefile) or Google Earth (KML or KMZ), is required.

Facilities managed & maintained by the Chicago Park District as of November 4, 2016.

The Illinois Enterprise Zone Program is designed to stimulate economic growth and neighborhood revitalization in economically depressed areas of the state. For more information about this program, go to http://www.commerce.state.il.us/dceo/Bureaus/Business_Development/Tax+Assistance/Enterprise-Zone.htm. The data can be viewed on the Chicago Data Portal with a web browser. However, to view or use the files outside of a web browser, you will need to use compression software and special GIS software, such as ESRI ArcGIS (shapefile) or Google Earth (KML or KMZ).

COVID-19 vaccinations administered to Chicago residents based on the home ZIP Code of the person vaccinated, as provided by the medical provider in Illinois Comprehensive Automated Immunization Registry Exchange (I-CARE). The ZIP Code where a person lives is not necessarily the same Zip Code where the vaccine was administered. Daily counts are shown for the total number of doses administered, first doses only, and number of people who have completed the necessary doses to be considered fully vaccinated, as well as cumulative totals for each measure as of that date. Requirements to be considered fully vaccinated vary depending on the vaccine manufacturer. Current vaccines require two doses of vaccine to be administered over a period of time specific to each vaccine brand; future vaccines may only require one dose to be considered fully vaccinated. Vaccinations are counted based on the day the vaccine was administered.

Coverage percentages are calculated based on cumulative first doses administered and cumulative number of people considered fully vaccinated in each Zip Code.

Population counts are from the American Community Survey 2014-2018 5-year estimates.

All data are provisional and subject to change. Information is updated as additional details are received and it is, in fact, very common for recent dates to be incomplete and to be updated as time goes on. At any given time, this dataset reflects data currently known to CDPH.

Numbers in this dataset may differ from other public sources due to when data are reported and how City of Chicago boundaries are defined.

For all datasets related to COVID-19, see https://data.cityofchicago.org/browse?limitTo=datasets&sortBy=alpha&tags=covid-19.

Data Source: Illinois Comprehensive Automated Immunization Registry Exchange (I-CARE) U.S. Census Bureau American Community Survey